 Linescan
215
The Linescan
215 is an X-ray security screening system with a compact design,
suitable for use where space is limited. With a tunnel opening of
610mm (24") wide by 468mm (18.44") high, the Linescan 215 is ideal
for the screening of briefcases and packages. The system is ideally
suited for embassies and mailrooms, government buildings, courtrooms,
nuclear power stations, and commercial facilities requiring screening
of small parcels. The Linescan 215 is also equally suitable for
carry-on baggage at airports where floor space may be a consideration.
Click Here to View Datasheet
Linescan 215's
come with a 1 year parts & labor warranty (Click
Here for More Information. )
Feature Highlights
- Tunnel opening of 610mm
(24.00") wide by 468mm (18.44") high for handling small parcels
such as carry-on baggage, briefcases and packages
- Steel penetration up
to 29mm (1.15")
- Compact design allows
for effective security screening in areas where space may be limited,
such as corporate mailrooms
- Advanced Options (Operator
Assist®, Image Archiving"! and Threat Image Projection (TIP) are
optionally available on all Linescan systems
| Linescan 215/V |
Optional
Features |
- Dual
17" color monitors
- Variable
gamma (color and B&W)
- .5
meter entry/exit converyors
- High
penetration
- Reverse
monochrome
- Suspicious
luggage alert
- Area
threshold alert
- Pseudo
color
- Automatic
threat alert
- Zoom
2x and 4x
- Edge
Tracing
- EDB
(120 Volt, 60Hz applications only)
|
|
Technical Specifications
| Resolution: |
38 AWG
guaranteed 40 AWG typical |
| Penetration: |
27mm (1.1")
steel guaranteed, 29mm (1.15") typical |
| Contrast
Sensitivity: |
At least
20 levels visible as measured by a step wedge |
| Dose per
inspection: |
Standard
0.05mR typical
E-Scan® 0.1mR typical |
| Tunnel
Opening: |
610mm
(24.00") wide x 468mm (18.44") high |
| Conveyor
Height: |
638mm
(25.12") |
| Power Requirements: |
115-120
VAC, 60Hz (15 amp max)
230-240 VAC, 50Hz (10 amp max) |
| Conveyor
Speed: |
0.23m
per sec (44 feet per min) @60Hz.
0.18m per sec (36 feet per min) @50Hz. |
| Conveyor
Capacity: |
68kg (150lbs.) |
| Airborne
Noise Level: |
<70dB
(A) |
| X-Ray
Source |
| Voltage: |
160kVp
constant potential tube operating @ 140kVp |
| Duty Cycle: |
100% |
| Cooling: |
Sealed
oil bath |
| Beam Orientation: |
Vertically
Upward |
| X-Ray
Sensor |
| 576
(1152 E-Scan®) photo diodes in folded array (L-shaped) configuration. |
| Digital
Memory |
| Digital
Memory Unit (Standard) |
1024 x
1024 x 8 |
| >E-Scan®: |
1024 x
1024 x 16 |
| Levels
of gray: |
256 |
| Physical
Specifications |
| Weight:
Approx: |
591kg
(1350 lbs) |
| Weight
(Crated): |
718kg
(1580 lbs) |
| Construction:
|
Uni-body
Frame |
| Environmental
|
| Operating
Temperature: |
+0°C (32°
F) to 40°C (104° F) |
| Storage
Temperature: |
-40°C
(-40° F) to 70°C (158° F) |
| Humidity:
|
95% non-condensing
|
| Video
Display |
| 15"
SVGA high resolution, low radiation, ergonomic, flicker free
display. E-Scan®: additional 15" SVGA color display
|
| Health
& Safety |
|
Complies
with all published International Standards including the U.S.
F.D.A., Center for Devices and Radiological Health Standards
for Cabinet X-Ray Systems (Federal Standard 21-CFR 1020.40).
Typical leakage radiation is less than 0.1 mR/hr. compared
to maximum leakage of 0.5 mR/hr. permitted by the Federal
Standard. Film Safety: Guaranteed for high speed films up
to ISO 1600.
|
| Operational
Standards |
|
Complies
with all published International Standards including the U.S.
Federal Aviation Administration Standards, "Use of X-Ray Systems"
(Federal Standards 14 CFR 108.17 and 14 CFR 129.26).
|
| Design
Policy |
|
Pricing
and Specifications are subject to change without notice.
|
Linescan 215 Dimensions Diagram
|
)
Linescan
215)
